Espresso Machine 20 Bar, Professional Espresso Maker with Milk Frother Steam Wan

a. With 20-bar professional Italian pump, it gives you top quality extraction, resulting in a more fragrant and rich aroma.

b. With built-in pressure gauge, it shows the exact pressure helping you make adjustments according to your personal taste preferences.

c. It has a powerful milk foaming steam wand, so you can texture creamy microfoam milk to create amazing milk foam art and enhance the flavor of your brews.

d. It makes a great gift for all of your loved ones.

How to Make Coffee Hot Enough?

If your coffee doesn’t taste hot enough, it may be caused by not running a pre-heating cycle before brewing.

Please try pre-heating the brew head, tubes, portafilter, and your mug by brewing a double espresso without adding any ground coffee. Place a cup under the portafilter, press the double espresso button, and hot water will flow out of the portafilter. Once the water has dispensed, pour it out, and then you can start brewing your coffee at the right temperature.

How to Cool Down the Machine?

If the 1 CUP/2 CUP indicators are flashing simultaneously and rapidly after the 1 CUP/2 CUP button is pressed, and you are unable to brew coffee, it indicates that the over-temperature protection is triggered.

PLEASE turn the knob on the side of the machine to the WATER position to let the hot water come out for 20 seconds, and then return the knob to the OFF position. When the boiler is cooled down, you can brew the coffee again.

PLEASE do not brew coffee immediately after frothing milk.

How to Stop Beeping?

When turned it on, the machine won’t stop beeping. 1 CUP/2 CUP/STEAM indicators are flashing simultaneously and buttons don’t work. It may indicate that the knob on the side of the machine is switched to the STEAM position.

PLEASE turn the knob back to the OFF position. Then the machine will stop beeping and work normally.

How to Pump Water?

If the espresso machine is running normally, but there is no coffee or water coming out, it means that the pump can not draw any water from the water tank.

PLEASE re-install the water tank 2-3 times. Turn on the machine and turn the steam knob to the WATER position to let the hot water come out for 20 seconds. Then return the steam knob to the OFF position.

How to Set the Volume?

Set the volume of 1/2 cup:

1. Press and hold the 1/2 CUP button for 3 seconds. Then hear a beep. Press the 1/2 CUP button again. The coffee will start to dispense.

2. When the desired amount is reached, press the 1/2 CUP button. You are done with the volume setting for a 1/2 cup.

Reset the default volumes: Simultaneously press and hold the 1 CUP and 2 CUP buttons for 3 seconds to restore to default dispensing amounts.